home
Acumotion
"A cut above"
Home * Products * Testimonials * Example Parts * Support * Contact

Powerful and affordable motion control at last!


 
Standard 2-Axis CNC conversion kit.
 The Standard 2-Axis CNC conversion kit includes two powerful 140 oz-in stepper motors prewired with connectors that plug into the 2-axis unipolar motion control driver.  The third axis (labeled Z) is not included with this kit.  The motors mount on Sherline mills and lathes using the included mounting hardware without any modification to the machine needed.  The mounting hardware consists of two mounting plates, 8 bolts and spacers, 2 aluminum helicoil flex shaft connectors with hex key, and 2 motor covers with binding screws.  The 2-axis unipolar motion control driver plugs into your PC's printer port with the included cable.  The software includes MyT'Mill for WindowsTM, a user guide, and a shareware CAD program.  The user guide includes a tutorial section to help you get started.
 
These are the available upgrades for the Standard 2-Axis CNC Mill package: 
Options Price
Standard 2-Axis CNC Conversion Kit: Includes 2-Axis unipolar motion control driver, two 140 oz-in stepper motors with mounting hardware, two flexible shaft couplers, MyT'Mill for Windows, CAD software, 25 pin cable, User's Guide 
800.00
Subtract 2 Acumotion motor mounts and flex couplers
-70.00
Substitue bigger power supply 120W vs 66W, also includes capability to run on European 220VAC
+20.00
110VAC Fan, provides more air flow without taxing DC power supply.
+17.00
Upgrade to EasyCAM Pro software
+200

Here are some of the most frequently ordered accessories with this package. 

Part No. Description Price
Qty
Sherline CNC Upgrade kit, 4000 or 4500 Lathe, Includes two Sherline motor mounts
142.50
Sherline CNC Upgrade kit, 4400 Lathe, Includes two Sherline motor mounts
152.00
Sherline CNC Upgrade kit, leadscrew axis only, 4000/4500 series lathes, Includes one Sherline motor mount
95.00
Sherline CNC Upgrade kit, leadscrew axis only, 4400 series lathes, Includes one Sherline motor mount
104.50
3012
 Hold Down Set (Simple strap clamp set for clamping parts to table for milling.  Includes 2 clamps, T-nuts and assorted length bolts)
19.00
3551
 Milling Vise
61.75
3560
 Mill Tooling Plate
42.75
7620
 Carbide Inserted Tip Flycutter
52.25
3080
 End Mill Set  The set consist of three 3-flute cutters.  Sizes are 1/8", 3/16" and 1/4" diameter, all with 1/4" shanks.
28.50
3060
 Milling Collets  (needed for cutting metal) consists of a 1/8", 3/16", and 1/4" mill collet, drawbolt, and thrust washer.
38.00
3079
 3/8" End Mill Holder
28.50
5300
 Home Shop Machinist's Handbook
18.00
5301
 Tabletop Machining Book
36.00