home
Acumotion
"A cut above"
Home * Products * Testimonials * Example Parts * Support * Contact

Powerful and affordable motion control at last!


 
Pro 3-Axis CNC Conversion Kit 
with 144 oz-in stepper motors
 The Pro 4-Axis CNC Conversion Kit includes four powerful 144 oz-in or 268 oz-in stepper motors prewired with connectors that plug into the bipolar chopper motion control driver.  The motors mount on Sherline mills and lathes using the included mounting hardware without any modification to the machine needed.  The mounting hardware consists of mounting plates, bolts and spacers, aluminum laser-cut flexible shaft connectors with hex key, and motor covers with binding screws.  The hardware mounts to Sherline mills and lathes using existing holes without any modification to the machine required.  You have the option to substitute Sherline's motor mounts for an additional cost.  Sherline's mounts do require modifying the machine somewhat.  The motion controller plugs into your PC's printer port with the included cable.  The software includes a shareware CAD program, CAM software called MyT'Mill for WindowsTM, and a user guide.  The user guide includes a tutorial section to help you get started. 
 

These are the available upgrades for the Pro 4-Axis CNC Mill package: 
Options Price
Pro 4-Axis CNC Conversion Kit: 4-Axis bipolar chopper motion control driver, four 144 oz-in stepper motors with mounting hardware, four flexible shaft couplers, MyT'Mill for Windows, CAD software, 25 pin cable, User's Guide
1550.00
Upgrade to 268 oz-in step motors
+200.00
Subtract 3 Acumotion motor mounts and flex couplers if your getting one of the Sherline CNC Upgrade Kits below.
-100.00
Upgrade to EasyCAM Pro software
+200.00

Here are some of the most frequently ordered accessories with this package.

Part No. Description Price
Qty
Sherline CNC Upgrade kit, 5000 or 5400 Mill, Includes three Sherline motor mounts
237.50
Sherline CNC Upgrade kit, 2000 Mill, Includes three Sherline motor mounts
237.50
Sherline CNC upgrade kit, Z-axis only
95.00
Sherline CNC upgrade kit, 5000 or 5400 Mill, X or Y axis only
80.75
3700-CNC
 4" Precision Rotary Table, CNC-Ready (Includes stepper motor mount ready for application of stepper motor.  Handwheel also included)  72:1 worm gear divides a circle into 3600 parts without interpolation.  Used for indexing radial hole patterns or milling radii or indexed flats.  Used on 3701 or 3750 to index for cutting gear teeth.  A mill with a rotary table is an extremely potent combination, making virtually any part possible, with size being the only limitation)
304.00
3012
 Hold Down Set (Simple strap clamp set for clamping parts to table for milling.  Includes 2 clamps, T-nuts and assorted length bolts)
23.75
3551
 Milling Vise
71.25
3560
 Mill Tooling Plate
57.00
7620
 Carbide Inserted Tip Flycutter
57.00
3080
 End Mill Set  The set consist of three 3-flute cutters.  Sizes are 1/8", 3/16" and 1/4" diameter, all with 1/4" shanks.
28.50
3060
 Milling Collets  (needed for cutting metal) consists of a 1/8", 3/16", and 1/4" mill collet, drawbolt, and thrust washer.
42.75
3079
 3/8" End Mill Holder
28.50
5300
 Home Shop Machinist's Handbook
23.75
5301
 Tabletop Machining Book
38.00